| Customization: | Available |
|---|---|
| Material: | Aluminum |
| Usage: | Print, Semiconductor, Automation and Control, Robot |
|
Still deciding? Get samples of US$ 12/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Six kinds of bore size , three kinds of type and Seven kinds of finger type .
2. Integrated design of linear guide roller , high rigidity and high precision .
3. A positioning pin is attached to the bottom of the linear guide rail , which can prevent the deviation of the positioning rail and body .
4. The squareness magnetic switch slots convenient to install DS1-G\CS1-G type inducting switch .
The roundness magnetic switch slots convenient to install DS1-H type inducting switch .
5. With positioning hole
The positioning hole can improve the precision and the consistency of repeated dismounting and positioning .
Specification
| 6 inner diameter(mm) | 6,10,16,20,25,32,40 |
| working medium | 40mm filtered air |
| action form | Double acting type,Single acting type |
| Use pressure range | |
| Multiple motion | 0.15~0.7MPa , 0.2~0.7MPa , 0.1~0.7MPa |
| single motion | 0.3~0.7MPa , 0.35~0.7MPa , 0.25~0.7MPa |
| use temperature range | -10~60ºC |
| Maximum service frequency | 180time/min |
| repeatability | ±0.01(mm) , ±0.02(mm) |
| oil feed | without |
| To take over the diameter | M3*0.5 , M5*0.8 |
How to order
| Code | MCH |
| Cylinder diameter | 6,10,16,20,25,32,40 |
| Action modes | D (repeated motion), O (single motion normally open), C (single motion normally closed) |
| Number of magnetic switches | S1 (1), S2 (2) |
){kind=link}